1911 5" Government 9mm Barrel, Nowlin Ramp
1911 5" Government 9mm Barrel, Nowlin Ramp


 
Our Price: $110.00


Stock Status:In Stock

Product Code: BA-P-1911-9-5-NR


Barrel Assembly:

Qty:  
Description
 
Remsport MFG 9mm Government barrel. Match grade upgrade for your current 1911 government pistol. Fully machined in the USA from stainless 416R in our facility. Barrel will fit slides with 9mm breech face.



***All parts must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.***

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 9mm ramped 1911 barrel May 26, 2020
Reviewer: paul from Jacksonville, FL United States  
Barrel seems like good quality. Did require some fitting of the hood and lower lugs. Locks up tight. Still have to shoot it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 1911 barrel June 30, 2019
Reviewer: Arthur Gomez from Spring, TX United States  
A great product ,I inadvertently ordered a ramped barrel instead of a non ramped for my Springfield 1911 when I received it I called your customer service and talked to Cody .I sent the barrel back and he said when he receives it he would send me the correct barrel

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good initial fit April 11, 2019
Reviewer: Anonymous Person from CT United States  
Barrel hood is a nice tight fit to the matching slide. Barrel fitting should be pretty straight forward with this one.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 9mm 1911 5" barrel February 9, 2019
Reviewer: Phil from CA United States  
Dropped right in my Spring Filed  9mm 1911. Shot 100 rounds on my last range trip and worked flawlessly.
It is a very accurate and seems to be a high quality  barrel.



Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 February 27, 2018
Reviewer: walter david kradin from scottsdale, AZ United States  
The 5" Government barrel was just received - it was nicely machined with  no tool marks and it was  polished.

The chamber was correct for 9mm and after slight adjustment to the hood the barrel popped in and out of battery with the bushing installed.

Applied a #3 barrel link and a barrel link pin and  removed the slightest amount from the bottom lugs - mainly to clear the step.

Like all high quality semi-fit barrels some material was "shoe shined" off the top of the chamber area and the top surface of the hood using strips of medium grit sandpaper- applied  lapping compound and worked the barrel and slide back and forth and got a great fit.

Bottom lugs well cut and smooth finish - very slight removal of metal, mostly polishing.

A slight amount of lapping compound on the front of the barrel to allow the barrel to tilt in and out of battery while maintaining a good fit.

For the price, given the quality, these barrels are a steal.



Was this review helpful to you?

View All Customer Reviews