$ 15 . 00  
Deal expires on
12/08/2019
$ 27 . 50
Regular Price
45%
Savings
Remsport MFG 2 Piece Government Guide Rod.

  • 416 Stainless Steel
  • Hex Key Broached Extra Deep
  • Centerless Ground Main Body
  • Heat Treated
  • RH Thread
  • Made in the USA
***All parts must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.***
$ 115 . 00  
Deal expires on
12/08/2019
$ 205 . 00
Regular Price
44%
Savings
Remsport Government Carbon .45 ACP with Front and Rear Serrations Novak Sights

  • .45 ACP
  • Front and Rear Serrations
  • Novak Sight Cuts
  • Forged from 4140 Carbon Steel
  • Uses 9mm Firing Pin
***All parts must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.***
$ 126 . 00  
Deal expires on
12/08/2019
$ 195 . 00
Regular Price
35%
Savings
Remsport MFG Browning Hi Power 9mm Nitride Replacement Barrel.

  • Designed as a Drop-in Replacement Barrel for Your Browning Hi Power
  • 100% Made in U.S.A. from U.S. Sourced 416 Stainless Steel
  • Precision Broach Cut 1:16LH Twist Rifling
  • CNC Diamond Honed Bore
  • Improved Chamber and Feed Ramp for Increased Reliability
  • Nitride Provides Durable Easy to Clean Black Finish

***All parts must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.***


$ 155 . 00  
Deal expires on
12/08/2019
$ 235 . 00
Regular Price
34%
Savings
Remsport G19 Gen 3 Nitride Slide with Front and Rear Serrations RMR Ready
  • 9mm
  • 100% Machined in House Using U.S. Sourced 416 Stainless Steel
  • Heat Treated
  • Ferritic-Nitrocarburized (Melonite™) for an Ultra-Durable Black Finish that is Integral to the Unit's Performance and Function
  • Front and Rear Serrations
  • Trijicon RMR Red Dot Ready ( Cover Plate Included)
  • Gen 3
$ 245 . 00  
Deal expires on
12/08/2019
$ 365 . 00
Regular Price
33%
Savings
10
Stock
Remsport G19 Gen 3 Nitride Slide with Front and Rear Serrations RMR Ready
  • 9mm
  • 100% Machined in House Using U.S. Sourced 416 Stainless Steel
  • Heat Treated
  • Ferritic-Nitrocarburized (Melonite™) for an Ultra-Durable Black Finish that is Integral to the Unit's Performance and Function
  • Rear Serrations and Front Lightening Cuts
  • Trijicon RMR Red Dot Ready ( Cover Plate Included)
  • Gen 3
$ 135 . 00  
Deal expires on
12/08/2019
$ 199 . 00
Regular Price
32%
Savings
Remsport G19 Gen 3 Nitride Slide with Front and Rear Serrations and Sights
  • 9mm
  • 100% Machined in House Using U.S. Sourced 416 Stainless Steel
  • Heat Treated
  • Ferritic-Nitrocarburized (Melonite™) for an Ultra-Durable Black Finish that is Integral to the Unit's Performance and Function
  • Front and Rear Serrations
  • Glock Factory White Dot Sights
  • Gen 3
  • Small Parts Not Included Will Need Slide Completion Kit
$ 105 . 00  
Deal expires on
12/08/2019
$ 139 . 99
Regular Price
25%
Savings
Remsport .40 S&W Replacement Barrel for the M&P Shield.
  • Designed as a Drop-in Replacment for your M&P Sheild
  • 100% Made in House from Select U.S. Sourced 416 Stainless Steel
  • Precision Broach Cut 1:16LH Twist Rifling
  • CNC Diamond Honed Bore
  • Improved Chamber and Feed Ramp Design for Increased Reliability
  • Barrels are Ferritic-Nitrocarburized (Melonite™) for an Ultra-Durable Black Finish that is Integral to the Unit's Performance and Function
  • Overall Barrel Length 3.1"
  • Lifetime Warranty on All RemSport Mfg Barrels

***All parts must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.***


$ 205 . 00  
Deal expires on
12/08/2019
$ 275 . 00
Regular Price
25%
Savings
Remsport G19 Gen 3 Nitride Slide with Front and Rear Serrations RMR Ready
  • 9mm
  • 100% Machined in House Using U.S. Sourced 416 Stainless Steel
  • Heat Treated
  • Ferritic-Nitrocarburized (Melonite™) for an Ultra-Durable Black Finish that is Integral to the Unit's Performance and Function
  • Rear Serrations and Front Lightening Cuts
  • Trijicon RMR Red Dot Ready ( Cover Plate Included)
  • Gen 3
  • 100% Made in House in Our Facility
  • Lifetime Warranty
***All parts must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.***
$ 145 . 00  
Deal expires on
12/08/2019
$ 180 . 00
Regular Price
19%
Savings
Remsport MFG Browning Hi Power 9mm Replacement Barrel.

  • Designed as a Drop-in Replacement Barrel for Your Browning Hi Power
  • 100% Made in U.S.A. from U.S. Sourced 416 Stainless Steel
  • Precision Broach Cut 1:16LH Twist Rifling
  • CNC Diamond Honed Bore
  • Improved Chamber and Feed Ramp for Increased Reliability

***All parts must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.***
$ 115 . 00  
Deal expires on
12/08/2019
$ 139 . 99
Regular Price
18%
Savings
Remsport .40 S&W to .357 Sig Conversion Barrel for the M&P Shield.
  • Designed as a Drop-in Solution, This Barrel Converts Your .40 cal Shield to .357 Sig Without Requiring Fitting.
  • 100% Made in House from Select U.S. Sourced 416 Stainless Steel
  • Precision Broach Cut 1:16LH Twist Rifling
  • CNC Diamond Honed Bore
  • Improved Chamber and Feed Ramp Design for Increased Reliability
  • Barrels are Ferritic-Nitrocarburized (Melonite™) for an Ultra-Durable Black Finish that is Integral to the Unit's Performance and Function
  • Overall Barrel Length 3.1"
  • Lifetime Warranty on All RemSport Mfg Barrels
***All parts must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.***



$ 115 . 00  
Deal expires on
12/08/2019
$ 139 . 99
Regular Price
18%
Savings
Remsport .40 S&W to 9mm Conversion Barrel for the M&P Shield.
  • Designed as a Drop-in Solution, This Barrel Converts Your .40 cal Shield to 9mm Without Requiring Fitting.
  • 100% Made in House from Select U.S. Sourced 416 Stainless Steel
  • Precision Broach Cut 1:16LH Twist Rifling
  • CNC Diamond Honed Bore
  • Improved Chamber and Feed Ramp Design for Increased Reliability
  • Barrels are Ferritic-Nitrocarburized (Melonite™) for an Ultra-Durable Black Finish that is Integral to the Unit's Performance and Function
  • Overall Barrel Length 3.1"
  • Must Be Used with 9mm Magazine
  • Lifetime Warranty on All RemSport Mfg Barrels


***All parts must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.***



$ 399 . 00  
Deal expires on
12/08/2019
$ 450 . 00
Regular Price
11%
Savings
Remsport 1911 5'' .45 Build/Conversion kit. Finish your custom build or change calibers with our match grade 5'' government model slide assembly. Components come pre-assembled and function tested by Remsport gunsmiths.
Assembly Includes
Forged 416 .45 ACP 5" slide with front, rear and top custom serrations
Forged 416R Match Grade 5" .45 ACP barrel cut rifled
Fully Machined matching stainless steel ejector/extractor
Novak front white dot sight
Novak white dot rear sight
Fully machined .45 ACP slide stop
Match grade barrel bushing

Two Piece Guide rod, spring plug, recoil spring
#1,2,3 barrel links
1 .45 ACP Act mag
Notice: All conversion kits must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.

Usually Ships Within 3-5 Days
$ 399 . 00  
Deal expires on
12/08/2019
$ 450 . 00
Regular Price
11%
Savings
Remsport 1911 5'' 9mm Build/Conversion kit. Finish your custom build or change calibers with our match grade 5'' government model slide assembly. Components come assembled and function tested by Remsport gunsmiths.
Assembly Includes


Forged 416 9mm 5" slide with front, rear and top custom serrations
Forged 416R Match Grade 5" 9mm cut rifled
Fully Machined matching stainless steel Ejector/Extractor
Novak front white dot sight
Novak white dot rear sight
Fully machined 9mm slide stop
Match grade barrel bushing
Two Peice Guide rod, spring plug, recoil spring
#1,2,3 barrel links
1 9mm mag

Notice: All conversion kits must be installed by a competent gunsmith. Some fitting and or tuning may be required. Remsport has no responsibility or liability of the final fit and function of the firearm.
Usually Ships In 3-5 Days